SF6 Gas Recycling and Reuse Solution: An Electrical Maintenance Solution that Meets Environmental Standards and Cuts Costs by 40%

SF6 Gas Recycling and Reuse Solution: An Electrical Maintenance Solution that Meets Environmental Standards and Cuts Costs by 40%

As the core insulating medium for high - voltage electrical equipment, SF6 gas has excellent performance but is a strong greenhouse gas. The control of its emissions has become a global environmental focus. A professional SF6 gas recycling and reuse solution, through closed - loop processing technology, can not only help enterprises meet the requirements of the Montreal Protocol and domestic environmental regulations, but also achieve the recycling of gas resources, becoming a key strategy for cost - reduction and efficiency - improvement in the power industry.

Why is it necessary to deploy an SF6 gas recycling and reuse solution?

In traditional maintenance, the direct emission of SF6 gas due to a decrease in purity not only faces the risk of an environmental penalty of up to 500,000 yuan per time, but also causes waste of hundreds of thousands of yuan in annual procurement. The SF6 gas recycling and reuse solution, through the whole - process control of "recovery - purification - detection - refilling", can reduce the emissions of a single set of substation equipment by more than 90% and reduce the gas procurement cost by 30% - 40%. The investment can be recovered in only 8 months.

Core System Composition of the SF6 Gas Recycling and Reuse Solution

1. An efficient SF6 gas recycling and reuse solution consists of three core modules:Intelligent Recovery System: Equipped with a mobile vacuum recovery device, it can quickly extract the residual gas in the equipment during maintenance, with a recovery rate stably above 98%, avoiding leakage losses.

2. Deep Purification Process: Through multi - stage drying, filtering, and adsorption purification, the gas purity is increased from 85% to 99.9%, and the water content is controlled below 5ppm, fully meeting the insulation performance requirements of the equipment.

3. Full - cycle Management System: Equipped with an intelligent detector and a data traceability platform, it can record the processing parameters, purity indicators, and reuse paths of each batch of SF6 gas in real - time, achieving full - process traceability of compliance.

Four Core Values of the SF6 Gas Recycling and Reuse Solution

1. Environmental Compliance Guarantee: It strictly complies with the GB 19047 - 2003 emission standards, helping enterprises smoothly pass the environmental impact assessment audit and avoiding policy risks.

2. Significant Cost Optimization: Calculated based on an annual consumption of 1000 kg of SF6, after implementing the solution, the annual procurement cost can be saved by about 400,000 yuan, and the long - term maintenance cost is significantly reduced.

3. Equipment Life Extension: The purified high - purity gas reduces impurity corrosion, extending the service life of circuit breakers, GIS, and other equipment by 3 - 5 years and reducing replacement costs.

4. Maintenance Efficiency Improvement: The automated processing process shortens the single - maintenance time from 8 hours to 4 hours, reducing equipment downtime losses.

Typical Application Scenarios of the SF6 Gas Recycling and Reuse Solution

This solution has been verified to be effective in multiple fields:

• Annual maintenance of 220 kV and above substations of power grid companies

• Daily maintenance of GIS equipment in wind and photovoltaic power plants

• Management of SF6 equipment in self - owned power plants of steel and chemical enterprises

After a certain power grid company introduced the SF6 gas recycling and reuse solution, its 50 substations reduced the annual emission of SF6 by about 3 tons (equivalent to 75,000 tons of carbon dioxide equivalent), not only winning recognition from the environmental protection department but also enjoying preferential green credit interest rates, with a significant improvement in comprehensive benefits.

How to Choose a High - quality SF6 Gas Recycling and Reuse Solution Service Provider?

A reliable solution should have three characteristics:

• The core equipment has passed the CQC certification, and the purification technology has an invention patent.

• It provides a full - cycle service of "equipment supply + process training + maintenance support".

• It can customize the processing capacity of 50 - 500 kg/batch according to the equipment scale.

Seize the Dual Dividends of Environment and Cost

Under the tightening "dual - carbon" policy, SF6 gas recycling and reuse has changed from an optional solution to a necessary action. Choosing a professional solution can not only fulfill environmental responsibilities but also tap cost - saving potential. Click to consult now to get a free on - site assessment and a customized solution, enabling SF6 gas resources to maximize their value.